STEALTH audio cables

Dream Petite Loudspeaker

The Dream Petite loudspeaker cables is a smaller (1/2 size) version of our are our best-to-date DREAM speaker cables.  It took over two years to develop the full Dream speaker cables, and then over a year to have the Dream Petite. Many prototypes have been made, and we listened to them extensively, but none of the earlier prototypes made it into beta testing - because none of them sounded sufficiently better than the Hybrid MLT...

As well as the full Dream, this one does.



>> Enlarge


The Dream stereo set consists of two round cables - which are 25 mm (1 inch) in diameter. The cables split at the ends into positive and negative runs. 

A simplified cross-section is shown below:



>> Enlarge


  • The outer layer of the Dream Petite cable is made of 6 wire assemblies and 2 spacers (dividers);

  • Each wire assembly is 6.35 mm (1/4 inch) in diameter, made of 8 individually insulated solid core wires in our proprietary non-resonant distributed LITZ configuration; two different thicknesses (gauges) of 99.999% pure solid core copper, and two different gauges of 99.997% pure solid core silver are used - per each wire assembly. 

  • The wire assemblies are wrapped around a hollow, flexible para-vacuum* center multi-core (flexible Helium-filled tubing).

  • Three wire assemblies being run side-by-side create wire bundles (triple runs). Therefore, there are two wire bundles (triple runs) in each Dream Petite cable.

  • The two wire bundles (triple runs) are separated by two soft (foam) Teflon dividing runs (spacers).

  • The spacers have the dame diameter as the wire assemblies, i.e. 6.35 mm (1/4 inch).

  • Using dividers dramatically reduces the overall cable capacitance and thus assures stability (non-oscillation) of any amplifier. 




Suggested retail price is $5,500 for a 2 meter pair, and $2,200 for each consecutive meter.

 (1.5 and shorter pair of Dream Petite speaker cables is $4,800);

bi-wiring adds $800 regardless of the length;


     * STEALTH para-vacuum tube is a hermetically sealed flexible tube filled with Helium; fist, Helium is approximately 15 times lighter than air, and therefore its energy storage properties are extremely good: about equal to that of a 15-fold vacuum; the dielectric properties of such environment are even better: Helium is inert and has no ozone or other ionized molecules, and therefore there are absolutely no leaks of any kind - and this is better than any realistic vacuum. In addition, being surrounded by Helium, the wires will never oxidize or deteriorate. And the last - but not least, sine - unlike any vacuum - the Helium pressure is exactly the same as the atmospheric air pressure, there is nothing to force our Helium to leak, plus the tubes remain flexible, and the Dream cables are user-friendly - unlike all other "vacuum" cables (which are very stiff and inevitably lose vacuum with time - i.e. unlike the Dream, need periodical service to maintain the performance).